Customisable Flush Plate — OLI Oceania MIA Match Any Wall | Pakistan
Couldn't load pickup availability
Brand: OLI | Model: Oceania MIA | Type: Customisable Dual-Flush Plate — Match Any Wall Finish | Sold by: Sardar & Co, Pakistan
The OLI Oceania MIA customisable flush plate in Pakistan is a 12mm dual-flush concealed cistern plate with a 10mm blank surface layer and high-resistance adhesive — allowing the specifier to apply any wall cladding material (marble, wood veneer, ceramic tile, stone, porcelain) to the flush plate surface, creating a completely seamless toilet wall in which the flush plate disappears into the wall material, exclusively through Sardar & Co.
The OLI Oceania MIA is a customisable flush plate — a 12mm total thickness plate with 10mm blank surface layer supplied with high-resistance adhesive for field application of any finish material: marble, wood veneer, ceramic tile, natural stone, porcelain slab, or any wall cladding up to 10mm thick. Stainless steel frame surrounds the finished surface. Mechanical dual-flush via tiltable button (tilt for full or partial flush — one button, two directions). Actuation force <20N. Anti-theft mechanism. Gull-Wing opening system. Dimensions 221×142mm. No electrical connection required. Compatible with OLI concealed cistern systems. Exclusively distributed in Pakistan by Sardar & Co, Aries Tower, Murree Road, Shamsabad, Rawalpindi. Contact: 0300-0341288 or sardarandco.com.
OLI Oceania MIA — Customisable Flush Plate for Seamless Concealed Toilet Walls
The entire purpose of a concealed toilet installation is to make the cistern, the plumbing, and the mechanical hardware disappear into the wall — leaving nothing visible except the toilet bowl and the tile or stone wall surface above it. Every flush plate in the OLI range at Sardar & Co achieves this to a degree: the stainless steel, ceramic, glass, or ABS plate covers the cistern access point and presents a clean, finished surface. But it remains a flush plate — a rectangular panel in a different material from the wall around it, always visible as a hardware element even when flush with the tile plane.
The OLI Oceania MIA solves this completely. It is a customisable flush plate that carries no fixed finish of its own. Instead, the specifier applies a 10mm piece of the same material used on the bathroom wall — marble, wood veneer, ceramic tile, porcelain slab, natural stone, or any wall cladding material — to the flush plate's blank surface layer using the high-resistance adhesive supplied with the plate. The stainless steel frame surrounds the finished surface. The result is a toilet wall where the flush plate is not a hardware element in a different material — it is the wall itself. The marble continues across the toilet wall and into the flush plate. The tile grid runs across the wall and across the flush plate. The concealed toilet installation is, at last, actually invisible.
This is the customisable flush plate for Pakistan's most ambitious concealed toilet specifications — the wall-hung toilet installation where the specification intent is not merely to hide the cistern but to erase every evidence of hardware from the toilet wall entirely.
Available exclusively through Sardar & Co, Pakistan's exclusive OLI distributor.
Key Features
- Customisable 10mm surface layer — blank surface accepts any wall cladding material up to 10mm thick; marble, wood veneer, ceramic tile, natural stone, porcelain, or any wall finish material creates a flush plate surface that continues the wall material seamlessly
- High-resistance adhesive supplied — purpose-formulated adhesive for bonding wall cladding to the flush plate surface included with the product; no additional bonding material required
- Stainless steel frame — precision stainless frame surrounds the finished surface; provides structural integrity and a clean edge transition between flush plate and surrounding wall
- Tiltable button — single tiltable button activates dual-flush: tilt in one direction for full flush, tilt in the other for partial flush; different haptic experience from standard press buttons; operates through the finished cladding surface
- Anti-theft mechanism — flush plate cannot be removed without a specific tool; essential for commercial, hospitality, and public-space installations where hardware security is required
- 12mm total thickness — 10mm cladding surface + 2mm base plate; slim enough for flush-mounted wall installation after cladding application
- Mechanical actuation — <20N force — no electricity required; reliable long-term dual-flush operation
- Gull-Wing opening system — plate opens safely for cistern installation and maintenance access without damaging the applied cladding surface
- 221×142mm format — standard cistern access format compatible with OLI in-wall frames
- Sardar & Co — Pakistan's exclusive OLI distributor — authentic OLI product with full brand warranty
Technical Specifications
| Specification | Detail |
|---|---|
| Brand | OLI (Portugal) |
| Model | Oceania MIA |
| Product Type | Customisable Dual-Flush Plate — Field-Applied Wall Cladding Surface |
| Surface Material | Blank — accepts any wall cladding up to 10mm (marble, tile, wood veneer, stone, porcelain) |
| Frame Material | Stainless steel |
| Surface Thickness (MIA) | 10mm — for applied cladding material |
| Total Thickness | 12mm |
| Dimensions | 221 × 142mm |
| Button Type | Tiltable — single button, two directions for full and partial flush |
| Actuation Type | Mechanical — tiltable button press |
| Actuation Force | <20N |
| Flush Operation | Dual-flush |
| Anti-Theft | Yes — requires specific tool for removal |
| Maintenance Access | Gull-Wing opening system |
| Adhesive | High-resistance adhesive supplied |
| Electrical Requirement | None — fully mechanical |
| Cistern Compatibility | OLI concealed cistern systems — confirm model before purchase |
| Pakistan Distributor | Sardar & Co — Aries Tower, Murree Road, Rawalpindi (exclusive) |
How to Specify the Oceania MIA — Applying Wall Cladding to the Flush Plate
The MIA surface customisation is a straightforward process executed during the bathroom fit-out phase, after the concealed cistern is installed and the wall is tiled:
The Oceania MIA plate arrives with a 10mm blank surface layer and high-resistance adhesive. The contractor or installer cuts a piece of the same wall cladding material used on the surrounding toilet wall — the exact same tile, stone slab, marble cut, or wood veneer — to the dimensions of the MIA surface area. The cladding piece is bonded to the flush plate surface using the supplied adhesive. After setting, the cladding-finished MIA plate is installed over the cistern access point. The stainless steel frame is fitted to edge the transition between the flush plate and the surrounding wall. The result: a flush plate whose surface is indistinguishable from the wall around it.
The tiltable button protrudes through the cladding surface — the only visible indication that the flush plate is a hardware element rather than a continuation of the wall. In marble or stone, the button reads as a precision-cut element emerging from the stone surface. In tile, it reads as a detail through the tile grid. The anti-theft mechanism beneath the cladding surface prevents the plate from being removed without the specific release tool.
Materials the Oceania MIA Works With
Marble and natural stone — the most premium Oceania MIA specification. A marble-cladded flush plate in a marble-tiled toilet wall is the architectural completion of the concealed toilet installation at the highest material level. The marble pattern and veining continue from the tile surface into the flush plate surface without interruption. The stainless frame edges the transition with precision. Against large-format marble slabs, the MIA flush plate is invisible at first glance — the marble pattern tells the eye it is simply more wall.
Large-format porcelain and ceramic tile — the most common MIA specification in Pakistan's premium residential and hospitality market. Large-format porcelain slabs (600×600mm, 800×800mm, 1200×600mm) create toilet walls where the tile grid is the dominant visual language. The MIA cladded with the same porcelain continues this grid across the flush plate — the concealed toilet wall reads as an uninterrupted tile plane with a tiltable button as the only visible hardware element.
Wood veneer — the most distinctive MIA specification for warm-toned and natural material bathrooms. A wood veneer flush plate on a wood-clad toilet wall continues the natural material across the flush plate surface. For bathrooms with timber wall panels, warm-toned wood vanities, and natural material palettes, the wood veneer MIA creates a flush plate that is simply more wall — more wood, more natural material, no hardware interruption.
Terrazzo, onyx, and exotic stone — for the most ambitious and design-specific bathroom specifications in Pakistan's premium residential and boutique hospitality market. The MIA accepts any material up to 10mm — including exotic stones, terrazzo slabs, and luxury wall materials that would be impossible to specify in any standard flush plate finish. Contact Sardar & Co at 0300-0341288 for guidance on applying exotic wall materials to the MIA surface.
Oceania MIA vs Oceania — Two OLI Customisable Plate Options
Sardar & Co stocks two OLI Oceania flush plate variants. Both share the customisable concept — allowing the specifier to apply wall cladding material to the flush plate surface. The MIA variant (this product) is distinguished by the stainless steel frame surrounding the finished surface, the 10mm cladding thickness, and the tiltable button. The OCEANIA standard variant may differ in frame specification or button format. Contact Sardar & Co at 0300-0341288 or visit the Rawalpindi showroom to compare both Oceania models before specifying.
Where the Oceania MIA Performs Best
Large-format tile and stone toilet wall specifications
Pakistan's most ambitious premium master bathroom specifications increasingly use large-format tile or stone slabs on toilet walls — 1200×600mm porcelain, full marble slabs, or continuous stone runs that create an uninterrupted material wall surface. The standard flush plate interrupts this surface with a panel in a different material. The Oceania MIA customisable flush plate eliminates this interruption — the large-format tile or stone continues across the cistern access point without colour, pattern, or material change.
Architecture and design firm-led bathroom specifications
For architects and interior designers specifying bathrooms where material continuity is a core design principle — where every surface material decision is deliberate and the introduction of a hardware element in a contrasting material contradicts the spatial intent — the Oceania MIA is the flush plate specification that eliminates the compromise. The concealed toilet installation finally becomes truly concealed at every visible surface level.
Five-star hotel suite bathrooms — wall material continuity
Pakistan's five-star hospitality sector investing in suite bathroom specifications that photograph seamlessly — marble walls, no visible hardware on the toilet wall — benefits directly from the MIA's customisable surface. A marble toilet wall with the Oceania MIA cladded in matching marble creates the suite bathroom photograph where the only visible element above the wall-hung toilet is wall. This is the specification that distinguishes the most ambitious hotel bathroom renovations from standard premium specifications.
Premium residential new construction — integrated specification
For new-build premium residential projects where the architect is specifying the complete bathroom material and hardware package, the Oceania MIA is the flush plate that integrates into the wall specification rather than being selected from a finish swatch. The wall material is chosen first; the MIA carries that choice to the flush plate automatically. This is the correct specification logic for a product category that is part of the wall, not hardware mounted on it.
About OLI and Sardar & Co
OLI is a Portuguese premium manufacturer of concealed cistern and flush plate systems. The Oceania MIA represents OLI's most architecturally ambitious flush plate specification — a customisable flush plate that accepts any wall material and disappears into the toilet wall surface. Available in Pakistan exclusively through Sardar & Co — Pakistan's exclusive OLI distributor, stocking the complete OLI flush plate range from mechanical stainless to glass to customisable at the Rawalpindi showroom.
Frequently Asked Questions
What makes the OLI Oceania MIA different from every other flush plate at Sardar & Co?
The Oceania MIA is the only flush plate at Sardar & Co — and in Pakistan — with a customisable surface: the specifier applies any wall cladding material (marble, tile, wood veneer, stone, porcelain) to the 10mm blank surface layer using the high-resistance adhesive supplied. The flush plate disappears into the wall material. No fixed finish, no standard colour — the flush plate surface is whatever the wall is. Available exclusively through Sardar & Co Pakistan. Call 0300-0341288 for pricing and specification support.
How is the wall cladding applied to the Oceania MIA flush plate?
During bathroom fit-out after the wall is tiled or clad, cut a 10mm piece of the same wall material to the MIA surface dimensions. Bond it to the blank surface using the high-resistance adhesive supplied with the plate. Allow to set. Install the cladded MIA over the cistern access point and fit the stainless steel frame. The tiltable button protrudes through the applied cladding surface. Contact Sardar & Co at 0300-0341288 for specification and installation guidance before purchase.
What wall materials can be applied to the Oceania MIA?
Any wall cladding material up to 10mm thick: marble, natural stone, ceramic tile, large-format porcelain, wood veneer, terrazzo, onyx, and most wall cladding materials. The high-resistance adhesive is purpose-formulated for bonding cladding to the MIA surface. Contact Sardar & Co at 0300-0341288 for guidance on exotic or heavy materials before specifying.
What is the tiltable button and how does it work?
The tiltable button is a single button that protrudes through the applied cladding surface. Tilting in one direction activates the full flush; tilting in the other direction activates the partial flush. This differs from standard push-button flush plates where two separate buttons are pressed directly. The tiltable mechanism operates through any cladding surface — tile, stone, or wood — and requires <20N actuation force.
What is the anti-theft feature on the Oceania MIA?
The Oceania MIA includes an anti-theft mechanism that prevents the plate from being removed from the wall without a specific release tool. Essential for commercial and hospitality installations where flush plate theft is a risk — hotel public washrooms, premium restaurant facilities, and commercial buildings where hardware security is a specification requirement alongside material aesthetics.
Is the Oceania MIA compatible with all OLI cisterns?
The MIA is designed for OLI concealed cistern systems. Confirm compatibility with your specific OLI cistern model before purchase. Contact Sardar & Co at 0300-0341288 — as Pakistan's exclusive OLI distributor, the Sardar & Co team can advise on the correct MIA and cistern pairing and the complete installation specification.
Where can I buy the OLI Oceania MIA customisable flush plate in Pakistan?
Exclusively through Sardar & Co — 4, 5 & 6 Aries Tower, Murree Road, Shamsabad, Rawalpindi. Browse sardarandco.com. Call 0300-0341288 for pricing, specification support, and installation guidance.
Explore More at Sardar & Co
- Compare: OLI Oceania Standard Flush Plate — sibling customisable model
- Compare: OLI Trumpet — Pritzker Prize designer, pneumatic, 5 finishes
- Compare: OLI Glassy — glass body, LED touchless, 4 finishes
- Compare: OLI Less is More — mechanical, 5 stainless finishes
- Compare: OLI BLINK — pneumatic, 8 finishes
- Compare: OLI SLIM — 11 finishes, AISI 304
- Pair with: OLI80 Simflex Concealed Cistern — OLI in-wall cistern system
- Browse all concealed flush tanks and plates — complete range at Sardar & Co
Sardar & Co is Pakistan's exclusive OLI distributor and trusted source for customisable flush plates, concealed cisterns, sanitary fittings, and luxury building materials. Showroom: 4–6 Aries Tower, Murree Road, Rawalpindi. Call 0300-0341288 or shop online at sardarandco.com — nationwide delivery across Pakistan.
Brand: OLI | Model: Oceania MIA | Type: Customisable Dual-Flush Plate — Match Any Wall Finish | Sold by: Sardar & Co, Pakistan
The OLI Oceania MIA customisable flush plate in Pakistan is a 12mm dual-flush concealed cistern plate with a 10mm blank surface layer and high-resistance adhesive — allowing the specifier to apply any wall cladding material (marble, wood veneer, ceramic tile, stone, porcelain) to the flush plate surface, creating a completely seamless toilet wall in which the flush plate disappears into the wall material, exclusively through Sardar & Co.
The OLI Oceania MIA is a customisable flush plate — a 12mm total thickness plate with 10mm blank surface layer supplied with high-resistance adhesive for field application of any finish material: marble, wood veneer, ceramic tile, natural stone, porcelain slab, or any wall cladding up to 10mm thick. Stainless steel frame surrounds the finished surface. Mechanical dual-flush via tiltable button (tilt for full or partial flush — one button, two directions). Actuation force <20N. Anti-theft mechanism. Gull-Wing opening system. Dimensions 221×142mm. No electrical connection required. Compatible with OLI concealed cistern systems. Exclusively distributed in Pakistan by Sardar & Co, Aries Tower, Murree Road, Shamsabad, Rawalpindi. Contact: 0300-0341288 or sardarandco.com.
OLI Oceania MIA — Customisable Flush Plate for Seamless Concealed Toilet Walls
The entire purpose of a concealed toilet installation is to make the cistern, the plumbing, and the mechanical hardware disappear into the wall — leaving nothing visible except the toilet bowl and the tile or stone wall surface above it. Every flush plate in the OLI range at Sardar & Co achieves this to a degree: the stainless steel, ceramic, glass, or ABS plate covers the cistern access point and presents a clean, finished surface. But it remains a flush plate — a rectangular panel in a different material from the wall around it, always visible as a hardware element even when flush with the tile plane.
The OLI Oceania MIA solves this completely. It is a customisable flush plate that carries no fixed finish of its own. Instead, the specifier applies a 10mm piece of the same material used on the bathroom wall — marble, wood veneer, ceramic tile, porcelain slab, natural stone, or any wall cladding material — to the flush plate's blank surface layer using the high-resistance adhesive supplied with the plate. The stainless steel frame surrounds the finished surface. The result is a toilet wall where the flush plate is not a hardware element in a different material — it is the wall itself. The marble continues across the toilet wall and into the flush plate. The tile grid runs across the wall and across the flush plate. The concealed toilet installation is, at last, actually invisible.
This is the customisable flush plate for Pakistan's most ambitious concealed toilet specifications — the wall-hung toilet installation where the specification intent is not merely to hide the cistern but to erase every evidence of hardware from the toilet wall entirely.
Available exclusively through Sardar & Co, Pakistan's exclusive OLI distributor.
Key Features
- Customisable 10mm surface layer — blank surface accepts any wall cladding material up to 10mm thick; marble, wood veneer, ceramic tile, natural stone, porcelain, or any wall finish material creates a flush plate surface that continues the wall material seamlessly
- High-resistance adhesive supplied — purpose-formulated adhesive for bonding wall cladding to the flush plate surface included with the product; no additional bonding material required
- Stainless steel frame — precision stainless frame surrounds the finished surface; provides structural integrity and a clean edge transition between flush plate and surrounding wall
- Tiltable button — single tiltable button activates dual-flush: tilt in one direction for full flush, tilt in the other for partial flush; different haptic experience from standard press buttons; operates through the finished cladding surface
- Anti-theft mechanism — flush plate cannot be removed without a specific tool; essential for commercial, hospitality, and public-space installations where hardware security is required
- 12mm total thickness — 10mm cladding surface + 2mm base plate; slim enough for flush-mounted wall installation after cladding application
- Mechanical actuation — <20N force — no electricity required; reliable long-term dual-flush operation
- Gull-Wing opening system — plate opens safely for cistern installation and maintenance access without damaging the applied cladding surface
- 221×142mm format — standard cistern access format compatible with OLI in-wall frames
- Sardar & Co — Pakistan's exclusive OLI distributor — authentic OLI product with full brand warranty
Technical Specifications
| Specification | Detail |
|---|---|
| Brand | OLI (Portugal) |
| Model | Oceania MIA |
| Product Type | Customisable Dual-Flush Plate — Field-Applied Wall Cladding Surface |
| Surface Material | Blank — accepts any wall cladding up to 10mm (marble, tile, wood veneer, stone, porcelain) |
| Frame Material | Stainless steel |
| Surface Thickness (MIA) | 10mm — for applied cladding material |
| Total Thickness | 12mm |
| Dimensions | 221 × 142mm |
| Button Type | Tiltable — single button, two directions for full and partial flush |
| Actuation Type | Mechanical — tiltable button press |
| Actuation Force | <20N |
| Flush Operation | Dual-flush |
| Anti-Theft | Yes — requires specific tool for removal |
| Maintenance Access | Gull-Wing opening system |
| Adhesive | High-resistance adhesive supplied |
| Electrical Requirement | None — fully mechanical |
| Cistern Compatibility | OLI concealed cistern systems — confirm model before purchase |
| Pakistan Distributor | Sardar & Co — Aries Tower, Murree Road, Rawalpindi (exclusive) |
How to Specify the Oceania MIA — Applying Wall Cladding to the Flush Plate
The MIA surface customisation is a straightforward process executed during the bathroom fit-out phase, after the concealed cistern is installed and the wall is tiled:
The Oceania MIA plate arrives with a 10mm blank surface layer and high-resistance adhesive. The contractor or installer cuts a piece of the same wall cladding material used on the surrounding toilet wall — the exact same tile, stone slab, marble cut, or wood veneer — to the dimensions of the MIA surface area. The cladding piece is bonded to the flush plate surface using the supplied adhesive. After setting, the cladding-finished MIA plate is installed over the cistern access point. The stainless steel frame is fitted to edge the transition between the flush plate and the surrounding wall. The result: a flush plate whose surface is indistinguishable from the wall around it.
The tiltable button protrudes through the cladding surface — the only visible indication that the flush plate is a hardware element rather than a continuation of the wall. In marble or stone, the button reads as a precision-cut element emerging from the stone surface. In tile, it reads as a detail through the tile grid. The anti-theft mechanism beneath the cladding surface prevents the plate from being removed without the specific release tool.
Materials the Oceania MIA Works With
Marble and natural stone — the most premium Oceania MIA specification. A marble-cladded flush plate in a marble-tiled toilet wall is the architectural completion of the concealed toilet installation at the highest material level. The marble pattern and veining continue from the tile surface into the flush plate surface without interruption. The stainless frame edges the transition with precision. Against large-format marble slabs, the MIA flush plate is invisible at first glance — the marble pattern tells the eye it is simply more wall.
Large-format porcelain and ceramic tile — the most common MIA specification in Pakistan's premium residential and hospitality market. Large-format porcelain slabs (600×600mm, 800×800mm, 1200×600mm) create toilet walls where the tile grid is the dominant visual language. The MIA cladded with the same porcelain continues this grid across the flush plate — the concealed toilet wall reads as an uninterrupted tile plane with a tiltable button as the only visible hardware element.
Wood veneer — the most distinctive MIA specification for warm-toned and natural material bathrooms. A wood veneer flush plate on a wood-clad toilet wall continues the natural material across the flush plate surface. For bathrooms with timber wall panels, warm-toned wood vanities, and natural material palettes, the wood veneer MIA creates a flush plate that is simply more wall — more wood, more natural material, no hardware interruption.
Terrazzo, onyx, and exotic stone — for the most ambitious and design-specific bathroom specifications in Pakistan's premium residential and boutique hospitality market. The MIA accepts any material up to 10mm — including exotic stones, terrazzo slabs, and luxury wall materials that would be impossible to specify in any standard flush plate finish. Contact Sardar & Co at 0300-0341288 for guidance on applying exotic wall materials to the MIA surface.
Oceania MIA vs Oceania — Two OLI Customisable Plate Options
Sardar & Co stocks two OLI Oceania flush plate variants. Both share the customisable concept — allowing the specifier to apply wall cladding material to the flush plate surface. The MIA variant (this product) is distinguished by the stainless steel frame surrounding the finished surface, the 10mm cladding thickness, and the tiltable button. The OCEANIA standard variant may differ in frame specification or button format. Contact Sardar & Co at 0300-0341288 or visit the Rawalpindi showroom to compare both Oceania models before specifying.
Where the Oceania MIA Performs Best
Large-format tile and stone toilet wall specifications
Pakistan's most ambitious premium master bathroom specifications increasingly use large-format tile or stone slabs on toilet walls — 1200×600mm porcelain, full marble slabs, or continuous stone runs that create an uninterrupted material wall surface. The standard flush plate interrupts this surface with a panel in a different material. The Oceania MIA customisable flush plate eliminates this interruption — the large-format tile or stone continues across the cistern access point without colour, pattern, or material change.
Architecture and design firm-led bathroom specifications
For architects and interior designers specifying bathrooms where material continuity is a core design principle — where every surface material decision is deliberate and the introduction of a hardware element in a contrasting material contradicts the spatial intent — the Oceania MIA is the flush plate specification that eliminates the compromise. The concealed toilet installation finally becomes truly concealed at every visible surface level.
Five-star hotel suite bathrooms — wall material continuity
Pakistan's five-star hospitality sector investing in suite bathroom specifications that photograph seamlessly — marble walls, no visible hardware on the toilet wall — benefits directly from the MIA's customisable surface. A marble toilet wall with the Oceania MIA cladded in matching marble creates the suite bathroom photograph where the only visible element above the wall-hung toilet is wall. This is the specification that distinguishes the most ambitious hotel bathroom renovations from standard premium specifications.
Premium residential new construction — integrated specification
For new-build premium residential projects where the architect is specifying the complete bathroom material and hardware package, the Oceania MIA is the flush plate that integrates into the wall specification rather than being selected from a finish swatch. The wall material is chosen first; the MIA carries that choice to the flush plate automatically. This is the correct specification logic for a product category that is part of the wall, not hardware mounted on it.
About OLI and Sardar & Co
OLI is a Portuguese premium manufacturer of concealed cistern and flush plate systems. The Oceania MIA represents OLI's most architecturally ambitious flush plate specification — a customisable flush plate that accepts any wall material and disappears into the toilet wall surface. Available in Pakistan exclusively through Sardar & Co — Pakistan's exclusive OLI distributor, stocking the complete OLI flush plate range from mechanical stainless to glass to customisable at the Rawalpindi showroom.
Frequently Asked Questions
What makes the OLI Oceania MIA different from every other flush plate at Sardar & Co?
The Oceania MIA is the only flush plate at Sardar & Co — and in Pakistan — with a customisable surface: the specifier applies any wall cladding material (marble, tile, wood veneer, stone, porcelain) to the 10mm blank surface layer using the high-resistance adhesive supplied. The flush plate disappears into the wall material. No fixed finish, no standard colour — the flush plate surface is whatever the wall is. Available exclusively through Sardar & Co Pakistan. Call 0300-0341288 for pricing and specification support.
How is the wall cladding applied to the Oceania MIA flush plate?
During bathroom fit-out after the wall is tiled or clad, cut a 10mm piece of the same wall material to the MIA surface dimensions. Bond it to the blank surface using the high-resistance adhesive supplied with the plate. Allow to set. Install the cladded MIA over the cistern access point and fit the stainless steel frame. The tiltable button protrudes through the applied cladding surface. Contact Sardar & Co at 0300-0341288 for specification and installation guidance before purchase.
What wall materials can be applied to the Oceania MIA?
Any wall cladding material up to 10mm thick: marble, natural stone, ceramic tile, large-format porcelain, wood veneer, terrazzo, onyx, and most wall cladding materials. The high-resistance adhesive is purpose-formulated for bonding cladding to the MIA surface. Contact Sardar & Co at 0300-0341288 for guidance on exotic or heavy materials before specifying.
What is the tiltable button and how does it work?
The tiltable button is a single button that protrudes through the applied cladding surface. Tilting in one direction activates the full flush; tilting in the other direction activates the partial flush. This differs from standard push-button flush plates where two separate buttons are pressed directly. The tiltable mechanism operates through any cladding surface — tile, stone, or wood — and requires <20N actuation force.
What is the anti-theft feature on the Oceania MIA?
The Oceania MIA includes an anti-theft mechanism that prevents the plate from being removed from the wall without a specific release tool. Essential for commercial and hospitality installations where flush plate theft is a risk — hotel public washrooms, premium restaurant facilities, and commercial buildings where hardware security is a specification requirement alongside material aesthetics.
Is the Oceania MIA compatible with all OLI cisterns?
The MIA is designed for OLI concealed cistern systems. Confirm compatibility with your specific OLI cistern model before purchase. Contact Sardar & Co at 0300-0341288 — as Pakistan's exclusive OLI distributor, the Sardar & Co team can advise on the correct MIA and cistern pairing and the complete installation specification.
Where can I buy the OLI Oceania MIA customisable flush plate in Pakistan?
Exclusively through Sardar & Co — 4, 5 & 6 Aries Tower, Murree Road, Shamsabad, Rawalpindi. Browse sardarandco.com. Call 0300-0341288 for pricing, specification support, and installation guidance.
Explore More at Sardar & Co
- Compare: OLI Oceania Standard Flush Plate — sibling customisable model
- Compare: OLI Trumpet — Pritzker Prize designer, pneumatic, 5 finishes
- Compare: OLI Glassy — glass body, LED touchless, 4 finishes
- Compare: OLI Less is More — mechanical, 5 stainless finishes
- Compare: OLI BLINK — pneumatic, 8 finishes
- Compare: OLI SLIM — 11 finishes, AISI 304
- Pair with: OLI80 Simflex Concealed Cistern — OLI in-wall cistern system
- Browse all concealed flush tanks and plates — complete range at Sardar & Co
Sardar & Co is Pakistan's exclusive OLI distributor and trusted source for customisable flush plates, concealed cisterns, sanitary fittings, and luxury building materials. Showroom: 4–6 Aries Tower, Murree Road, Rawalpindi. Call 0300-0341288 or shop online at sardarandco.com — nationwide delivery across Pakistan.