Slim Flush Tank — Grohe SOLO SLIM 88.9mm Concealed Cistern | Pakistan
Couldn't load pickup availability
Brand: Grohe | Model: SOLO SLIM | Depth: 88.9mm | Capacity: 3–6 litres | Type: Standalone Concealed Flushing Cistern | Sold by: Sardar & Co, Pakistan
The Grohe SOLO SLIM slim flush tank in Pakistan is an 88.9mm-deep standalone concealed cistern — the slimmest flush tank in the Sardar & Co range — with a pneumatic discharge valve offering three operating modes (dual flush, start/stop, or single flush), integrated angle valve and push-fit hose union, low-noise Group I operation, and anti-condensation insulation, exclusively through Sardar & Co.
The Grohe SOLO SLIM is a standalone concealed flushing cistern — cistern body only, no frame and no flush plate included. Depth: 88.9mm (3.5 inches) — among the slimmest concealed cisterns available in Pakistan. Capacity: 3–6 litres, factory-set at 6l full flush and 3l partial flush. Pneumatic discharge valve with three selectable modes: dual flush, start/stop, or single flush. Water supply: top-entry, ½" connection with integrated angle valve and push-fit flexible hose union included. Low noise: Group I classification per German DIN Noise Specification. Insulated against condensation. Shortable inspection shaft with construction-phase protection. Revision shaft (art. 40 949 000) required for small flush plates — ordered separately. Exclusively distributed in Pakistan by Sardar & Co, Aries Tower, Murree Road, Shamsabad, Rawalpindi. Contact: 0300-0341288 or sardarandco.com.
Grohe SOLO SLIM — Slim Flush Tank for Pakistan's Shallow Wall Installations
The 88.9mm depth of the Grohe SOLO SLIM is the specification detail that defines this product's purpose. Standard concealed cisterns are 120–150mm deep — they require a wall cavity or partition build-out of at least 130–160mm to accommodate them. The slim flush tank at 88.9mm requires just under 9cm of wall depth. This 30–60mm difference is the difference between a concealed cistern fitting into an existing wall cavity and not fitting at all.
In Pakistan's renovation and retrofit market — where homeowners are upgrading existing bathrooms to wall-hung WC installations without the benefit of new construction planning — the depth of the partition wall's existing cavity is the critical constraint. Many existing Pakistani residential bathrooms have 100–110mm partition walls. The standard concealed cistern does not fit. The Grohe SOLO SLIM slim flush tank at 88.9mm is the cistern that resolves this constraint — the concealed toilet installation that renovation projects can actually execute within existing wall structures.
This is also the correct specification for new-build projects where architectural intent keeps partition walls as thin as possible — minimalist bathroom design that pushes every millimetre of wall thickness into usable floor space.
Available exclusively through Sardar & Co, Pakistan's authorised Grohe distributor.
Key Features
- 88.9mm depth — the defining slim specification — fits in wall cavities where standard 120–150mm cisterns cannot; the correct concealed cistern for renovation projects with existing shallow wall cavities and new-build thin-wall specifications
- Three flush modes — pneumatic discharge valve — selectable at installation: dual flush (full 6l / partial 3l), start/stop (press to start, press again to stop mid-flush for maximum water saving), or single flush (6l fixed); one cistern, three operating options
- Factory-set 6l / 3l — pre-calibrated at factory; 6 litres full flush, 3 litres partial flush; no on-site calibration required as installed
- Integrated angle valve and push-fit hose union — ½" water supply connection with angle valve and flexible hose union included in the cistern body; components typically purchased separately are included
- Top-entry water supply — water enters from the top of the cistern; minimises noise during refill
- Low noise — Group I (German DIN Specification) — the highest noise classification for concealed cisterns per German technical standards; inaudible operation in adjacent rooms
- Anti-condensation insulation — cistern body insulated to prevent surface condensation; no drips or moisture on the wall surface in Pakistan's humid bathroom conditions
- Shortable inspection shaft — adjustable length for precise installation depth; includes protection sleeve for the construction phase
- Revision shaft 40 949 000 for small flush plates — must be ordered separately; required when specifying small-format flush plates with this cistern
Technical Specifications
| Specification | Detail |
|---|---|
| Brand | Grohe (Germany) |
| Model | SOLO SLIM |
| Product Type | Standalone Concealed Flushing Cistern — no frame, no flush plate |
| Depth | 88.9mm (3.5 inches) |
| Capacity | 3–6 litres |
| Factory Setting | 6l full flush / 3l partial flush |
| Discharge Valve | Pneumatic |
| Flush Modes | 3 selectable: Dual flush / Start-Stop / Single flush |
| Water Supply | Top-entry, ½" connection |
| Included Fittings | Integrated angle valve + push-fit flexible hose union |
| Noise Rating | Group I — low noise per German DIN Specification |
| Condensation | Insulated against condensation |
| Inspection Shaft | Shortable — with construction-phase protection |
| Revision Shaft | Art. 40 949 000 — required for small flush plates, ordered separately |
| Frame Included | No — ordered separately |
| Flush Plate Included | No — ordered separately |
| WC Pan Included | No — sold separately |
| Pakistan Distributor | Sardar & Co — Aries Tower, Murree Road, Rawalpindi (authorised) |
The Three Flush Modes — Choosing the Right One
The SOLO SLIM's pneumatic discharge valve is the most operationally flexible cistern in the Sardar & Co concealed cistern range. Three modes are selectable at installation — the plumber sets the mode during rough-in based on the project's requirements:
Dual Flush — the standard concealed cistern mode. Two flush buttons (or a dual-zone flush plate) activate either the full 6-litre flush or the partial 3-litre flush. The user selects which flush volume to use each time. The mode used in most premium residential and hospitality installations — it is the mode that most flush plates at Sardar & Co are designed for. This is the factory default mode.
Start/Stop — the maximum water-saving mode. Press the flush button once to start the flush; press again at any point to stop it mid-flush. The user controls exactly how much water is used for each flush — for lighter use, a brief flush of less than 3 litres is possible. For heavier use, the full 6-litre flush runs. In commercial and hospitality installations where water conservation is a formal requirement, start/stop mode delivers the most flexible and efficient water usage. This mode requires a single-button flush plate — not a dual-flush plate.
Single Flush — the simplest mode. One button, one flush volume (6 litres), every time. No decision required from the user. The mode for installations where simplicity is the priority — elderly care specifications, children's bathrooms, and commercial installations where user variability in flush selection is not desired.
SOLO SLIM vs Grohe Rapid SL — Two Different Products
Two Grohe concealed toilet products are available at Sardar & Co. Understanding their distinction prevents a common specification error:
Grohe SOLO SLIM (this product) — the cistern body only. 88.9mm slim-profile cistern with pneumatic valve and three flush modes. No frame, no flush plate. The specification when you need the cistern component specifically — typically because you already have a compatible frame, or because you are specifying the cistern for a renovation where the frame has been separately sourced.
Grohe Rapid SL 3-in-1 WC Set — the complete frame and cistern set. Steel frame + GD 2 cistern + Skate Cosmopolitan Chrome flush plate + wall brackets, all in one package. The specification for new-build projects where the complete frame, cistern, and flush plate are being specified together from scratch.
Contact Sardar & Co at 0300-0341288 to confirm which product is correct for your specific installation — renovation with existing frame vs new-build complete specification.
Where the SOLO SLIM Performs Best
Bathroom renovation projects — shallow existing wall cavities
Pakistan's renovation market is the primary specification context for the SOLO SLIM. When a homeowner or developer is retrofitting a wall-hung WC installation into an existing bathroom — converting a floor-standing toilet installation to a concealed cistern wall-hung specification — the wall cavity is the constraint that the SOLO SLIM resolves. At 88.9mm, it fits in wall structures where standard cisterns at 120–150mm cannot. For renovation projects in DHA, Bahria Town, and Pakistan's existing premium residential stock, this is the slim flush tank that makes the concealed toilet upgrade possible within the existing wall structure.
Thin-wall new-build specifications
For architects designing new-build bathrooms where minimising partition wall thickness is a spatial priority — maximising usable floor area in compact master bathrooms, or maintaining thin wall profiles in contemporary minimalist design — the SOLO SLIM at 88.9mm allows a concealed cistern partition wall to be approximately 110mm thick vs the 140–160mm required for standard cisterns. In a compact master bathroom, this difference is measurable floor area returned to the room.
Commercial water-conservation specifications — start/stop mode
For premium commercial washrooms, corporate offices, and hospitality properties with formal water conservation requirements, the SOLO SLIM in start/stop mode delivers maximum flush flexibility. The pneumatic start/stop valve allows users to use precisely the water volume required — less than 1 litre for a brief flush, up to 6 litres for a full flush — with a single button press to start and a second press to stop. No other flush tank at Sardar & Co provides this level of water-use control.
Low-noise premium residential specifications
The SOLO SLIM's Group I noise classification means cistern refill is inaudible through standard partition walls. In Pakistan's premium master bedroom suite bathrooms — where the bathroom may share a wall with the sleeping area — the Group I low-noise specification prevents the cistern refill sound from disturbing sleep after a night-time flush. This is the concealed cistern specification detail that most buyers do not think to check until after installation.
About Grohe
Grohe is a German-origin premium water technology brand. The SOLO SLIM represents Grohe's slim-profile concealed cistern engineering — 88.9mm depth, three selectable flush modes, integrated supply fittings, anti-condensation insulation — the concealed slim flush tank for renovation and thin-wall specifications where standard cisterns do not fit. Available in Pakistan exclusively through Sardar & Co.
Frequently Asked Questions
What makes the Grohe SOLO SLIM different from a standard concealed cistern?
The defining difference is depth: 88.9mm (3.5 inches) vs 120–150mm for standard concealed cisterns. The SOLO SLIM fits in wall cavities where standard cisterns cannot — making it the correct specification for renovation projects with existing shallow walls and new-build thin-wall specifications. It also offers three flush modes (dual flush, start/stop, single flush) and includes the angle valve and push-fit hose union. Available exclusively through Sardar & Co Pakistan. Call 0300-0341288 for pricing.
What are the three flush modes and how do I choose?
Three selectable modes set during installation: (1) Dual flush — two buttons activate 6l or 3l flush; the standard mode for most installations. (2) Start/stop — one button starts the flush, a second press stops it mid-flush for maximum water saving; requires a single-button flush plate. (3) Single flush — one button, always 6 litres; the simplest mode for elderly care and commercial simplicity requirements. The mode is set by the plumber at installation — choose based on the installation context and flush plate type.
What is NOT included with the Grohe SOLO SLIM?
The SOLO SLIM is the cistern body only. Not included: installation frame, flush plate, WC pan, and revision shaft (art. 40 949 000 — required for small flush plates, ordered separately). Contact Sardar & Co at 0300-0341288 for compatible frame, flush plate, and revision shaft specification for your installation.
What minimum wall depth does the SOLO SLIM require?
The cistern body is 88.9mm deep. With the installation frame and finished wall surface, the minimum partition wall depth is typically 100–115mm — confirm with your installation contractor based on the specific frame being used. This is 30–50mm less than standard concealed cisterns, making it the correct choice for shallow existing wall cavities in renovation projects.
What is the revision shaft art. 40 949 000 and when is it needed?
The revision shaft (article 40 949 000) is a separate component required when mounting small-format flush plates on the SOLO SLIM cistern. It must be ordered separately — it is not included in the cistern. Contact Sardar & Co at 0300-0341288 to confirm whether your chosen flush plate requires the revision shaft and to order it alongside the SOLO SLIM cistern.
Is the SOLO SLIM compatible with OLI or Axent flush plates?
The SOLO SLIM is a Grohe concealed cistern. Flush plate compatibility depends on the installation frame and cistern access opening dimensions. OLI and Axent flush plates are designed for their own cistern systems. Contact Sardar & Co at 0300-0341288 for flush plate compatibility guidance before specifying.
Where can I buy the Grohe SOLO SLIM slim flush tank in Pakistan?
Exclusively through Sardar & Co — 4, 5 & 6 Aries Tower, Murree Road, Shamsabad, Rawalpindi. Browse sardarandco.com. Call 0300-0341288 for pricing, revision shaft availability, and compatible frame and flush plate specification.
Explore More at Sardar & Co
- Compare: Grohe Rapid SL 3-in-1 WC Set — complete frame + GD2 cistern + flush plate package for new-build
- Pair with: Grohe Skate Air Flush Plate — Gold, Black & Silver for Grohe cistern installations
- Pair with: Grohe Skate Cosmopolitan Flush Plate — design-forward Grohe flush plate
- Pair with: OMSA F3212 Muslim Shower — complete toilet area hardware
- Pair with: OMSA YH6604 Toilet Shower — premium handheld toilet spray
- Browse all concealed flush tanks — complete range at Sardar & Co
Sardar & Co is Pakistan's authorised Grohe distributor and trusted source for slim flush tanks, concealed cisterns, flush plates, sanitary fittings, and luxury building materials. Showroom: 4–6 Aries Tower, Murree Road, Rawalpindi. Call 0300-0341288 or shop online at sardarandco.com — nationwide delivery across Pakistan.
Brand: Grohe | Model: SOLO SLIM | Depth: 88.9mm | Capacity: 3–6 litres | Type: Standalone Concealed Flushing Cistern | Sold by: Sardar & Co, Pakistan
The Grohe SOLO SLIM slim flush tank in Pakistan is an 88.9mm-deep standalone concealed cistern — the slimmest flush tank in the Sardar & Co range — with a pneumatic discharge valve offering three operating modes (dual flush, start/stop, or single flush), integrated angle valve and push-fit hose union, low-noise Group I operation, and anti-condensation insulation, exclusively through Sardar & Co.
The Grohe SOLO SLIM is a standalone concealed flushing cistern — cistern body only, no frame and no flush plate included. Depth: 88.9mm (3.5 inches) — among the slimmest concealed cisterns available in Pakistan. Capacity: 3–6 litres, factory-set at 6l full flush and 3l partial flush. Pneumatic discharge valve with three selectable modes: dual flush, start/stop, or single flush. Water supply: top-entry, ½" connection with integrated angle valve and push-fit flexible hose union included. Low noise: Group I classification per German DIN Noise Specification. Insulated against condensation. Shortable inspection shaft with construction-phase protection. Revision shaft (art. 40 949 000) required for small flush plates — ordered separately. Exclusively distributed in Pakistan by Sardar & Co, Aries Tower, Murree Road, Shamsabad, Rawalpindi. Contact: 0300-0341288 or sardarandco.com.
Grohe SOLO SLIM — Slim Flush Tank for Pakistan's Shallow Wall Installations
The 88.9mm depth of the Grohe SOLO SLIM is the specification detail that defines this product's purpose. Standard concealed cisterns are 120–150mm deep — they require a wall cavity or partition build-out of at least 130–160mm to accommodate them. The slim flush tank at 88.9mm requires just under 9cm of wall depth. This 30–60mm difference is the difference between a concealed cistern fitting into an existing wall cavity and not fitting at all.
In Pakistan's renovation and retrofit market — where homeowners are upgrading existing bathrooms to wall-hung WC installations without the benefit of new construction planning — the depth of the partition wall's existing cavity is the critical constraint. Many existing Pakistani residential bathrooms have 100–110mm partition walls. The standard concealed cistern does not fit. The Grohe SOLO SLIM slim flush tank at 88.9mm is the cistern that resolves this constraint — the concealed toilet installation that renovation projects can actually execute within existing wall structures.
This is also the correct specification for new-build projects where architectural intent keeps partition walls as thin as possible — minimalist bathroom design that pushes every millimetre of wall thickness into usable floor space.
Available exclusively through Sardar & Co, Pakistan's authorised Grohe distributor.
Key Features
- 88.9mm depth — the defining slim specification — fits in wall cavities where standard 120–150mm cisterns cannot; the correct concealed cistern for renovation projects with existing shallow wall cavities and new-build thin-wall specifications
- Three flush modes — pneumatic discharge valve — selectable at installation: dual flush (full 6l / partial 3l), start/stop (press to start, press again to stop mid-flush for maximum water saving), or single flush (6l fixed); one cistern, three operating options
- Factory-set 6l / 3l — pre-calibrated at factory; 6 litres full flush, 3 litres partial flush; no on-site calibration required as installed
- Integrated angle valve and push-fit hose union — ½" water supply connection with angle valve and flexible hose union included in the cistern body; components typically purchased separately are included
- Top-entry water supply — water enters from the top of the cistern; minimises noise during refill
- Low noise — Group I (German DIN Specification) — the highest noise classification for concealed cisterns per German technical standards; inaudible operation in adjacent rooms
- Anti-condensation insulation — cistern body insulated to prevent surface condensation; no drips or moisture on the wall surface in Pakistan's humid bathroom conditions
- Shortable inspection shaft — adjustable length for precise installation depth; includes protection sleeve for the construction phase
- Revision shaft 40 949 000 for small flush plates — must be ordered separately; required when specifying small-format flush plates with this cistern
Technical Specifications
| Specification | Detail |
|---|---|
| Brand | Grohe (Germany) |
| Model | SOLO SLIM |
| Product Type | Standalone Concealed Flushing Cistern — no frame, no flush plate |
| Depth | 88.9mm (3.5 inches) |
| Capacity | 3–6 litres |
| Factory Setting | 6l full flush / 3l partial flush |
| Discharge Valve | Pneumatic |
| Flush Modes | 3 selectable: Dual flush / Start-Stop / Single flush |
| Water Supply | Top-entry, ½" connection |
| Included Fittings | Integrated angle valve + push-fit flexible hose union |
| Noise Rating | Group I — low noise per German DIN Specification |
| Condensation | Insulated against condensation |
| Inspection Shaft | Shortable — with construction-phase protection |
| Revision Shaft | Art. 40 949 000 — required for small flush plates, ordered separately |
| Frame Included | No — ordered separately |
| Flush Plate Included | No — ordered separately |
| WC Pan Included | No — sold separately |
| Pakistan Distributor | Sardar & Co — Aries Tower, Murree Road, Rawalpindi (authorised) |
The Three Flush Modes — Choosing the Right One
The SOLO SLIM's pneumatic discharge valve is the most operationally flexible cistern in the Sardar & Co concealed cistern range. Three modes are selectable at installation — the plumber sets the mode during rough-in based on the project's requirements:
Dual Flush — the standard concealed cistern mode. Two flush buttons (or a dual-zone flush plate) activate either the full 6-litre flush or the partial 3-litre flush. The user selects which flush volume to use each time. The mode used in most premium residential and hospitality installations — it is the mode that most flush plates at Sardar & Co are designed for. This is the factory default mode.
Start/Stop — the maximum water-saving mode. Press the flush button once to start the flush; press again at any point to stop it mid-flush. The user controls exactly how much water is used for each flush — for lighter use, a brief flush of less than 3 litres is possible. For heavier use, the full 6-litre flush runs. In commercial and hospitality installations where water conservation is a formal requirement, start/stop mode delivers the most flexible and efficient water usage. This mode requires a single-button flush plate — not a dual-flush plate.
Single Flush — the simplest mode. One button, one flush volume (6 litres), every time. No decision required from the user. The mode for installations where simplicity is the priority — elderly care specifications, children's bathrooms, and commercial installations where user variability in flush selection is not desired.
SOLO SLIM vs Grohe Rapid SL — Two Different Products
Two Grohe concealed toilet products are available at Sardar & Co. Understanding their distinction prevents a common specification error:
Grohe SOLO SLIM (this product) — the cistern body only. 88.9mm slim-profile cistern with pneumatic valve and three flush modes. No frame, no flush plate. The specification when you need the cistern component specifically — typically because you already have a compatible frame, or because you are specifying the cistern for a renovation where the frame has been separately sourced.
Grohe Rapid SL 3-in-1 WC Set — the complete frame and cistern set. Steel frame + GD 2 cistern + Skate Cosmopolitan Chrome flush plate + wall brackets, all in one package. The specification for new-build projects where the complete frame, cistern, and flush plate are being specified together from scratch.
Contact Sardar & Co at 0300-0341288 to confirm which product is correct for your specific installation — renovation with existing frame vs new-build complete specification.
Where the SOLO SLIM Performs Best
Bathroom renovation projects — shallow existing wall cavities
Pakistan's renovation market is the primary specification context for the SOLO SLIM. When a homeowner or developer is retrofitting a wall-hung WC installation into an existing bathroom — converting a floor-standing toilet installation to a concealed cistern wall-hung specification — the wall cavity is the constraint that the SOLO SLIM resolves. At 88.9mm, it fits in wall structures where standard cisterns at 120–150mm cannot. For renovation projects in DHA, Bahria Town, and Pakistan's existing premium residential stock, this is the slim flush tank that makes the concealed toilet upgrade possible within the existing wall structure.
Thin-wall new-build specifications
For architects designing new-build bathrooms where minimising partition wall thickness is a spatial priority — maximising usable floor area in compact master bathrooms, or maintaining thin wall profiles in contemporary minimalist design — the SOLO SLIM at 88.9mm allows a concealed cistern partition wall to be approximately 110mm thick vs the 140–160mm required for standard cisterns. In a compact master bathroom, this difference is measurable floor area returned to the room.
Commercial water-conservation specifications — start/stop mode
For premium commercial washrooms, corporate offices, and hospitality properties with formal water conservation requirements, the SOLO SLIM in start/stop mode delivers maximum flush flexibility. The pneumatic start/stop valve allows users to use precisely the water volume required — less than 1 litre for a brief flush, up to 6 litres for a full flush — with a single button press to start and a second press to stop. No other flush tank at Sardar & Co provides this level of water-use control.
Low-noise premium residential specifications
The SOLO SLIM's Group I noise classification means cistern refill is inaudible through standard partition walls. In Pakistan's premium master bedroom suite bathrooms — where the bathroom may share a wall with the sleeping area — the Group I low-noise specification prevents the cistern refill sound from disturbing sleep after a night-time flush. This is the concealed cistern specification detail that most buyers do not think to check until after installation.
About Grohe
Grohe is a German-origin premium water technology brand. The SOLO SLIM represents Grohe's slim-profile concealed cistern engineering — 88.9mm depth, three selectable flush modes, integrated supply fittings, anti-condensation insulation — the concealed slim flush tank for renovation and thin-wall specifications where standard cisterns do not fit. Available in Pakistan exclusively through Sardar & Co.
Frequently Asked Questions
What makes the Grohe SOLO SLIM different from a standard concealed cistern?
The defining difference is depth: 88.9mm (3.5 inches) vs 120–150mm for standard concealed cisterns. The SOLO SLIM fits in wall cavities where standard cisterns cannot — making it the correct specification for renovation projects with existing shallow walls and new-build thin-wall specifications. It also offers three flush modes (dual flush, start/stop, single flush) and includes the angle valve and push-fit hose union. Available exclusively through Sardar & Co Pakistan. Call 0300-0341288 for pricing.
What are the three flush modes and how do I choose?
Three selectable modes set during installation: (1) Dual flush — two buttons activate 6l or 3l flush; the standard mode for most installations. (2) Start/stop — one button starts the flush, a second press stops it mid-flush for maximum water saving; requires a single-button flush plate. (3) Single flush — one button, always 6 litres; the simplest mode for elderly care and commercial simplicity requirements. The mode is set by the plumber at installation — choose based on the installation context and flush plate type.
What is NOT included with the Grohe SOLO SLIM?
The SOLO SLIM is the cistern body only. Not included: installation frame, flush plate, WC pan, and revision shaft (art. 40 949 000 — required for small flush plates, ordered separately). Contact Sardar & Co at 0300-0341288 for compatible frame, flush plate, and revision shaft specification for your installation.
What minimum wall depth does the SOLO SLIM require?
The cistern body is 88.9mm deep. With the installation frame and finished wall surface, the minimum partition wall depth is typically 100–115mm — confirm with your installation contractor based on the specific frame being used. This is 30–50mm less than standard concealed cisterns, making it the correct choice for shallow existing wall cavities in renovation projects.
What is the revision shaft art. 40 949 000 and when is it needed?
The revision shaft (article 40 949 000) is a separate component required when mounting small-format flush plates on the SOLO SLIM cistern. It must be ordered separately — it is not included in the cistern. Contact Sardar & Co at 0300-0341288 to confirm whether your chosen flush plate requires the revision shaft and to order it alongside the SOLO SLIM cistern.
Is the SOLO SLIM compatible with OLI or Axent flush plates?
The SOLO SLIM is a Grohe concealed cistern. Flush plate compatibility depends on the installation frame and cistern access opening dimensions. OLI and Axent flush plates are designed for their own cistern systems. Contact Sardar & Co at 0300-0341288 for flush plate compatibility guidance before specifying.
Where can I buy the Grohe SOLO SLIM slim flush tank in Pakistan?
Exclusively through Sardar & Co — 4, 5 & 6 Aries Tower, Murree Road, Shamsabad, Rawalpindi. Browse sardarandco.com. Call 0300-0341288 for pricing, revision shaft availability, and compatible frame and flush plate specification.
Explore More at Sardar & Co
- Compare: Grohe Rapid SL 3-in-1 WC Set — complete frame + GD2 cistern + flush plate package for new-build
- Pair with: Grohe Skate Air Flush Plate — Gold, Black & Silver for Grohe cistern installations
- Pair with: Grohe Skate Cosmopolitan Flush Plate — design-forward Grohe flush plate
- Pair with: OMSA F3212 Muslim Shower — complete toilet area hardware
- Pair with: OMSA YH6604 Toilet Shower — premium handheld toilet spray
- Browse all concealed flush tanks — complete range at Sardar & Co
Sardar & Co is Pakistan's authorised Grohe distributor and trusted source for slim flush tanks, concealed cisterns, flush plates, sanitary fittings, and luxury building materials. Showroom: 4–6 Aries Tower, Murree Road, Rawalpindi. Call 0300-0341288 or shop online at sardarandco.com — nationwide delivery across Pakistan.